Odyssey 48″ x 36″ Music Festival DJ Table with 4-Leg Kit

ATT-PRO-4836
UPC: 807822409338

• Tabletop measures approximately 48″ x 36″ x 6.75″
• Table height ranges approximately from 31″ to 48″
• The ATT-PRO tables can be joined together on any of the four sides to form a bigger working area.
• Table legs measure 22.5″ in length.
• Table height can be adjusted via the height adjustable feet.

Available in various other sizes.
96″ x 36″ (ATT-PRO-9636)
96″ x 24″ (ATT-PRO-9624)
72″ x 24″ (ATT-PRO-7224)
48″ x 36″ (ATT-PRO-4836)
48″ x 24″ (ATT-PRO-4824)

Odyssey Pro DJ Table – Setup & Breakdown instructions

Setup Procedure
First step, set all four risers to the desired height, tighten both Allen bolts on each riser to ensure proper security and stability.
Have one or more qualify person(s) tilt and hold the DJ table securely on its longest side while the riser installation person(s) inserts each riser fully into the DJ table socket (pressure clamping jaw must be 100% in contact with the riser’s rounded tube surface) ensure each riser is fully inserted, tighten each socket hand knob until snug and give an additional 1/4 turn, then pull on each riser to confirm it is tight and secure.
Carefully tilt the DJ table back upright and adjust the built-in leveling feet as needed to ensure the DJ table is level and stable.

Breakdown / Tear-Down Procedure
Tilt the DJ table onto its longest side and have a qualified person(s) hold the DJ table securely.
Loosen each riser’s hand knob and remove the risers one at a time, starting from top to bottom.
After the risers are completely removed from the Pro DJ table sockets, you may now retract each riser to the desired length.

Important Safety Warning
If any Allen bolt is loosened while the DJ table top is still mounted, the weight of the tabletop can drop suddenly and may cause bodily injury.
Always inspect all fasteners to ensure all are in good condition, none missing and all are tighten and secured prior to operation. Never operate the DJ table with loose risers, missing fasteners or unsecured hand knobs.
Use appropriate number of qualified personnel required for safely setup and breakdown procedures.
Do not lower any risers at any time while the tabletop is installed. If riser height adjustment is required, tilt the DJ table onto its longest side, have a qualified person(s) hold the DJ table securely while another person(s) adjusts the risers to the desired height, tighten both Allen bolts on each riser, then pull on each riser to confirm it is tight and secure. Carefully tilt the DJ table back upright and adjust the built-in leveling feet as needed to ensure the DJ table is level and stable. Failure to follow this safety notice may cause serious bodily injury.
If a riser is lowered while the DJ tabletop is still mounted, the weight of the tabletop can drop suddenly and may cause bodily injury.
Set up and tear down by qualified staging and rigging professionals only.

*** Props used in the product pictures or the interior of the soft cases/bags such as DJ controller, DJ mixer, different parts of the DJ podium, mixing console, accessories, speaker, TV monitor, cable, laptop, computer, microphone, headphones, sneeze guard, slipmat, turntable, turntable needle, etc are not included with the product. ***
Disclaimer: Odyssey Innovative Designs strives to ensure the accuracy of the information contained herein. However, due to the constant changes in raw material availability and usage, improvements in design, typographical errors, and other factors that may be beyond our control, We reserve the right to make changes in designs, styles, features, colors, dimensions, and other specifications without prior notice. Gear (for examples, laptops, DJ controllers, turntables, mixers, microphones, headphones, needles, cartridges, mats, and others) shown in product images are not included. Certain areas of the product images may not be shown in scale due to the nature of the photography. Copyrighted logos and trademarks are those of the respective company: Akai, Alesis, Allen & Heath, American Audio, Apple, Avertec, B-52, BBE, Behringer, Boss, Cascio, Chauvet, Coemar, Cortex, Crown, Dell, Denon, Digidesign, Drawmer, Elation, Fender, Gemini, Gemsound, Hercules, Korg, M-Audio, Mackie, Marshall, Martin, Mesa, Multi-Cart, Numark, Ortofon, Pearl River, Peavey, Pioneer, Rane, Robe, Roland, Serato, Shure, Sony, Soundcraft, Tascam, Technics, Traktor Scratch, Vestax, Vox, Yamaha, etc. Equipment pictured not included.